Raglan Sweater Generator

37547 total stitches in project.

Estimated yarn needed is 1192 yards.

Knitting Settings
Pattern name is
All units will be in
Plain knitting will be at tension
Ribbed knitting will be at tension
For plain knitting, there are stitches per inches of fabric
For plain knitting, there are rows per inches of fabric
For ribbed knitting, there are rows per inches of fabric
Body Settings
The body panel will be inches tall from hem to neckline
The bottom ribbed hem will be inches tall
The width of the sweater will be inches
The armpit depth is inches
Sleeve Settings
The circumference of the ribbed cuff will be inches
The ribbed cuff will be inches long
The length from the neckline to the wrist will be inches
The circumference of the sleeve at the armpit will be inches
Neckline Settings
The circumference of the neckline will be inches
The ratio of the sleeves to the back will be percent
The ratio of the front shaping total neckline width will be percent
The turtleneck length will be inches

Instructions

Front

  1. Cast on 88 stitches of 1x1 ribbing.
  2. Set row counter to zero.
  3. Set the tension to 4.
  4. Knit 20 rows of 1x1 ribbing.
  5. Move all ribber stitches to the main bed.
  6. Set row counter to zero.
  7. Set the tension to 6.
  8. Knit 80 rows.
  9. Knit to row 134. Do a full-fashioned decrease of one stitch on both sides on the following rows: 82, 84, 87, 89, 91, 93, 96, 98, 100, 102, 104, 107, 109, 111, 113, 115, 118, 120, 122, 124, 127, 129, 131, 133
  10. Hold the center 16 stitches.
  11. Hold all stitches on the side opposite the carriage.
  12. Knit to row 143. Place one neckline stitch in hold on every row. Do a full-fashioned decrease of one stitch on the outside on the following rows: 135, 138, 140
  13. Reset the row counter to row 134.
  14. Place the carriage on the outside of the opposite side of the work.
  15. Bring all stitches on carriage side, except the inner 8 stitches, into work.
  16. Knit to row 143. Place one neckline stitch in hold on every row. Do a full-fashioned decrease of one stitch on the outside on the following rows: 135, 138, 140
  17. Place remaining 34 stitches in a stitch holder.

Back

  1. Cast on 88 stitches of 1x1 ribbing.
  2. Set row counter to zero.
  3. Set the tension to 4.
  4. Knit 20 rows of 1x1 ribbing.
  5. Move all ribber stitches to the main bed.
  6. Set row counter to zero.
  7. Set the tension to 6.
  8. Knit 80 rows.
  9. Knit to row 143. Do a full-fashioned decrease of one stitch on both sides on the following rows: 82, 84, 87, 89, 91, 93, 96, 98, 100, 102, 104, 107, 109, 111, 113, 115, 118, 120, 122, 124, 127, 129, 131, 133, 135, 138, 140
  10. Place remaining 34 stitches in a stitch holder.

Sleeve

  1. Cast on 34 stitches of 1x1 ribbing.
  2. Set row counter to zero.
  3. Set the tension to 4.
  4. Knit 20 rows of 1x1 ribbing.
  5. Move all ribber stitches to the main bed.
  6. Set row counter to zero.
  7. Set the tension to 6.
  8. Knit to row 109. Do a full-fashioned increase of one stitch on both sides on the following rows: 6, 13, 19, 26, 32, 38, 45, 51, 58, 64, 71, 77, 83, 90, 96, 103
  9. Knit to row 171. Do a full-fashioned decrease on both sides on the following rows: 111, 113, 115, 117, 119, 121, 123, 126, 128, 130, 132, 134, 136, 138, 140, 142, 144, 146, 148, 150, 152, 154, 157, 159, 161, 163, 165, 167, 169
  10. Place remaining 8 stitches in a stitch holder.

Turtleneck

  1. Seam together the front, right sleeve, and back.
  2. Seam the left sleeve to the front.
  3. Place 84 neckline stitches from their holders onto the main bed.
  4. Move stitches to the ribber depending on the desired ribbing pattern.
  5. Set the tension to 4.
  6. Knit 46 rows.
  7. Move all stitches to the main bed.
  8. Use a loose cast off to remove the work from the main bed.